Company News

Why Is the High Pressure Pump Ventilated and Its Troubleshooting Points

Update:09 Oct 2018

Among the different types of pumps, the ones that are c […]

Among the different types of pumps, the ones that are consistent with the website products are mainly High Pressure Pump, as well as high-pressure cleaning pumps and high-pressure reciprocating pumps. However, in order to have a good learning effect, we will not confuse these three pumps. Below, we will give specific explanations to the high pressure pumps, so that learning will be targeted.

1. Why should the self-priming high pressure pump in the high pressure pump be placed in a well-ventilated place? And, under normal circumstances, it usually takes a few minutes to get out of water?

Self-priming high pressure pump, which is one of the high pressure pumps, is required to be placed in a well-ventilated place, mainly for the purpose of facilitating rapid heat dissipation, thereby effectively reducing the motor temperature. Otherwise, if the ventilation effect is not good, it is easy to make the motor temperature too high, and in turn, the motor will burn out.

Self-priming high pressure pump, under normal circumstances, after normal start-up, generally, after 3 to 5 minutes, it will be discharged. If this is not the case, it should be stopped immediately and cannot be delayed.

2. If the high pressure pump has a fault, what wrong operations should be avoided?

If the high pressure pump has a problem, then we should avoid some of the wrong operations, mainly:

It is not possible to disassemble the high-pressure pump arbitrarily or privately, as it may be blindly disassembled, causing the high-pressure pump to be damaged or even unusable. Moreover, during the disassembly process, some special tools may be used in the high pressure pump. If other improper tools are used instead, the pump will be seriously damaged.

3. What are the instructions for the high pressure pump during non-use?

High pressure pumps, if they are in non-use, then we should know that they mainly have:

The high pressure pump should be kept away from the water source, placed in a dry place, and drained from the pump. Because, if the ambient temperature is low, the water will freeze and damage the high pressure pump. In addition, the period of its use should not be too long, because if it is not used for a long time, the parts in the pump may be rusted, thus shortening the service life.

© Copyright 2017 Wenling Nine Continent Electromechanical Co., Ltd.

Technical Support: HWAQ