Company News

Wenling High Pressure Washer (Clean the Pipeline)

Update:04 Sep 2018
Summary:

Wenling High Pressure Washer play a very important role […]

Wenling High Pressure Washer play a very important role in the cleaning of pipelines, and the cleaning effect is very good, so it is very popular among people. High pressure washers clean dirt and oil by raising the water pressure to a certain strength and then high-pressure jetting. The current pipeline cleaning equipment is also very large, but the cleanliness of scrubbing pipes is different, and many tools may cause secondary damage, which is not conducive to the next use, and high pressure washers will not have this kind of situation.

High pressure washer can be used to clean up gas pipes, oil in the kitchen flues, and silt, debris, twigs, and other lumps of difficult-to-clean contaminants. These pipes are best cleaned with a high pressure of 15-30 MPa. Cleaning within this pressure range can effectively ensure that there will be no secondary damage, and that the pipeline can be cleaned efficiently.

To flush the pipeline, place the Automatic Pressure Washer within a certain pressure range. Spray the water column through a special spray gun. The pressure is particularly high. In this case, be careful not to injure yourself. When the water column is sprayed, the stains or oil stains in the pipes or sewers to be cleaned can be cleaned in a short time, which saves time and effort. The cleaned pipe is also very clean and the cleansing effect is optimal. Oil smoke pipes treat oil stains in particular. Because of the high pressure, they can quickly separate the stains from the pipe wall and quickly flush out the oil stains to ensure that the pipe wall will not be damaged and prevent the remaining grease from being used for the next time.

When using the high pressure washer, pay attention to safety, because the water pressure is very high, to prevent injury to people. It is best to communicate with the technicians during the operation so that he can tell the use of skills. High pressure washer uses a technical process. The first step is to increase the water pressure, and then use a high-pressure spray gun to control the outflow through a professional water pipe. The high-pressure water gun can control the injection direction and water pressure. High pressure washers have a very simple way of cleaning the pipeline, and a high efficiency cleaner can clean a 20-meter-long water pipe in just one minute. And it's very clean.

© Copyright 2017 Wenling Nine Continent Electromechanical Co., Ltd.

Technical Support: HWAQ

Sitemap