Company News

Three high-pressure washing machine performance

Update:05 Dec 2017

     The first part: the scientific choice of products […]

     The first part: the scientific choice of products for their own needs is the foundation. Whether we are business or individuals, when buying pressure washer, according to their own financial budget, choose the most suitable for their needs of machinery and equipment, can not blindly pursue high standards, can not blindly seek the price cheap. We must give top priority to the needs of our own. To investigate the first market to understand all types of cleaning equipment, for comparison. For example, among the series of high-pressure cleaners, there are models that use cold water, hot water models, motor-driven models, gasoline-powered models, and diesel-powered models. We have to choose the most suitable for their own use. If it is not the object of cleaning oil, there is no need to buy hot water equipment, because this equipment plus more heating system components hot water boiler, you do not have it for a long time, aging and corrosion, both a waste of funds, not Good for maintaining good device performance. So, buy cold water type washing machine on it. Also according to the nature of the target being cleaned, select the appropriate pressure parameters for the high-pressure pump, if the rated pressure of 50 MPa is required, do not choose the rated pressure of 30 MPa, otherwise cleaning will cause overloaded operation , Cleaning efficiency is not high, is not conducive to maintaining the good performance of the washing machine. Only the best of science to buy the products they use, is to maintain its good performance.
The second part: the correct operation to use to prevent failure, long-term maintain good performance, play the greatest role of equipment. As we all know, high-pressure pump has the maximum pressure and the rated pressure of two parameters, we use the operation, the pressure should normally be run at rated pressure is not recommended at maximum pressure. Do not exceed 30 minutes even if you temporarily need to work under maximum pressure. This will help maintain the good performance of the washing machine. To follow the operating procedures and precautions listed in the product manual, do not violate the specified sequence, and monitor the data displayed on the instrument, such as pressure gauge, oil gauge, etc., at any time during operation and use, to maintain within the specified parameters Within the operation.
The third part: Serious maintenance is to ensure the good performance of equipment and extend the service life of the guarantee. Maintenance is divided into routine maintenance and regular maintenance of two, routine maintenance of the contents are: boot before you check the adequacy of oil, to check the various connected components are connected closely, to check the filter is clean and so on. After the high-pressure cleaning task is completed, it is necessary to drain the residual water in the clean machine and equipment, wipe clean the machine, store the inlet pipe and outlet pipe, and place the equipment in a ventilated and dry place. Also regular maintenance, regular replacement of oil, usually after 200 hours of operation, the replacement of new oil, to prevent the old oil lubrication effect of poor wear and tear of the machine. Regularly check the seal is aging, timely replacement of the new seal, to maintain good sealing equipment.

© Copyright 2017 Wenling Nine Continent Electromechanical Co., Ltd.

Technical Support: HWAQ