Company News

The Common Sense of Safety Operating the High Pressure Cleaner

Update:03 Sep 2018
Summary:

Cleaning with high pressure cleaners has become a very […]

Cleaning with high pressure cleaners has become a very common practice. Wenling High Pressure Cleaner has a lot of advantages because of their fast cleaning speed and high efficiency. However, if they are handled improperly, they can be very harmful. Therefore, when operating high pressure cleaners, you need to know some safety operational common sense.

Because the high pressure cleaner can quickly and easily remove stubborn stains, it is widely used in various industries. High pressure cleaners have been under high pressure due to the working principle. Therefore, when using high pressure cleaners, safety issues are of utmost importance. Which aspects we need to pay attention to in our use:

Always drain the hose after each use; never activate the device until all hose connections have been locked in place; always check all electrical connections; always inspect the hose for cracks and Leakage; always check all liquids; when not using spray gun, always set the trigger to safety lock; always use minimum pressure as much as possible to work, but this pressure should be enough to complete the work; disconnect the soft Before the tubing is connected, always relieve the pressure in the washing machine first. When operating the pressure washer: always wear appropriate goggles, gloves and masks; never touch the gun against yourself or anyone else; always keep the hand Do not touch the nozzle with the feet; never turn on the equipment until the supply water is turned on and the appropriate water flows through the gun lever. Then connect the required cleaning nozzle to the gun lance.

Note: Do not leave the high pressure cleaner unattended during operation. The pump will operate in bypass mode each time you release the trigger. If a pump has been operating in the bypass mode for a long time, the excessive temperature of the circulating water in the pump will shorten the life of the pump or even damage the pump. Therefore, avoid long-term operation of the device in bypass mode.

© Copyright 2017 Wenling Nine Continent Electromechanical Co., Ltd.

Technical Support: HWAQ

Sitemap