Company News

How to Carry out Maintenance on High Pressure Cleaner

Update:15 Nov 2018
Summary:

The High Pressure Cleaner is the fastest growing new ty […]

The High Pressure Cleaner is the fastest growing new type of high pressure cleaning equipment in recent years. It is widely used in various industries due to its low cleaning cost, no pollution to the environment, no damage to the materials to be cleaned and high cleaning efficiency. Everyone knows that even the best machinery and equipment needs to be maintained. So, how should the daily maintenance and maintenance of the pressure washer be carried out? This article mainly introduces this aspect.

First: When cleaning the hose and filter of the high pressure cleaner, it is recommended to use an appropriate amount of detergent, so that the detergent can be effectively removed from the high pressure cleaner, and the pure water can be used to supply the high pressure cleaner. It is strictly forbidden to contain sand and other impurities in the water. Frequently flush the scale deposited in the inlet pipe.

Second: connect one end of the inlet pipe to the inlet of the high pressure cleaner, the other end into the bucket, connect the water source and the power supply, turn the high-pressure gun to trigger, and wait for the air in the high pressure pump to drain, then enter the working state.

Third: In order to ensure that all the pressure inside the hose can be released every time the high pressure cleaner is used, you need to pull the trigger on the servo gun rod in time;

Fourth: In order to ensure a long service life of the high pressure cleaner, you need to develop a habit every time you use the high pressure cleaner, that is, remove all the hoses installed on the washing machine, such as rubber soft. Tubes and high pressure hoses, etc.

Fifth: Check the pump before water supply to ensure water supply with a certain water pressure and flow rate. There is no rust in the water tank. The filter should be inspected regularly to ensure no blockage and damage. Prevent the solid particles from entering the pump and nozzle with the water pipe. The filter should be water quality. The requirements are adapted.

Sixth: After the cleaning operation, rinse the hose and filter connected to the detergent to remove any detergent residue to prevent corrosion.

© Copyright 2017 Wenling Nine Continent Electromechanical Co., Ltd.

Technical Support: HWAQ

Sitemap