During the use of the electric bicycle, the user genera […]
During the use of the electric bicycle, the user generally does not need to maintain and maintain the internal components of the Electric Bicycle Motor. It is only necessary to check the state of the fasteners mounted on the rear fork member of the electric wheel hub. If it is found that the nut is loose, it should be tightened in time. Nuts or professionals are required to check the treatment.
When the electric bicycle motor stops running, timely remove dust and sludge from the motor, keep the electric bicycle motor clean and prevent oil and water from entering the motor. Do not spray directly with water when cleaning.
Check if the lead wire of the electric bicycle motor is scratched, and if there is any abnormal noise when the electric bicycle motor runs, please consult the professional if necessary.
A chained motor should be regularly lubricated with the chain.
All circuit and electrical connection of Hub Motor are designed and guided by professional personnel. Users are not allowed to modify and change their own, otherwise it is prone to malfunctions and accidents (including: serious consequences such as fire, traffic accidents).
Although various electric appliances and components of electric bicycle motors have certain waterproof functions, their waterproof performance may be degraded due to damage, aging, etc., so electric vehicles should not be driven on the road where the water depth can be submerged to the motor shaft. When parking or driving in the rain, various switches and handles should be covered with a rain cover to prevent the electrical components from being damaged by moisture.
Electric wheels should not be subjected to severe impact, and electric vehicles should not be forced to start in a state of blockage. When the electric vehicle cannot be started due to being blocked, do not start it repeatedly. The electric bicycle motor should be started after the cause of the electric vehicle is blocked.