Wenling High Pressure Cleaner uses water as the working […]
Wenling High Pressure Cleaner uses water as the working medium. Usually, the power-driven pump converts ordinary water into high-pressure and low-flow water by performing a suction and discharge process on the water, and then delivers it to the high-pressure pipeline to make it with a certain energy. Arrive at the high pressure nozzle. The aperture of the high pressure nozzle is much smaller than the diameter of the high pressure line, so the water reaching the high pressure nozzle must be accelerated through the nozzle. In this way, the nozzle can convert high-pressure, low-flow water into a low-pressure, high-flow jet. The jetted high-pressure water jet tangentially or positively impacts the surface of the object to be cleaned (workpiece) as a jet operation.
High pressure water jets are the simplest form of energy conversion and application. When the impact force of the high-pressure water jet is greater than the adhesion of the dirt to the surface of the object, the dirt is peeled off and washed away to reach a cleaning device for cleaning the surface of the object. Because the high pressure cleaner uses high-pressure water column to clean dirt, it is also recognized as one of the most scientific, economical and environmentally friendly cleaning methods in the world.
The previous cleaning method was done manually with a small shovel. The disadvantage of this method is that the dirt is not cleaned, the work speed is slow, a lot of manpower and material resources are needed, and scaffolding and pedaling are required. The entire cleaning operation environment is very Bad, labor intensive.
Cleaning the glue tank with a high pressure cleaner can improve the deficiencies in manual cleaning. First of all, in order to reduce the disadvantages of occupying a lot of manpower and material resources, it is necessary to design a special cleaning auxiliary facility. This is an umbrella type hanger. The umbrella type hanger is a skeleton similar to an umbrella. When it is gathered, it is put into the tank from the top of the glue tank. Then, the umbrella stand is opened, the appropriate pedal is laid, and a working platform that can move up and down is built, and the working platform is moved up and down by the mechanical control of the tank. The pressure washer operator stands on the working platform and can hold the gun to clean any position of the glue tank to achieve the purpose of cleaning.